TROLLEYLIFT

Information

Whether you are lifting beer barrels, sack barrows, large roll containers or washing machines, you can choose either the 250kg or 300kg Trolleylift, by Platform Lift Solutions, to suit your exact lifting requirements.

The Trolleylift operates inside a supported framework, which is easy to install and requires minimal building work. No separate motor room or load-bearing shaft is needed, which keeps costs and space down to a minimum.

The Trolleylift, by Platform Lift Solutions, is easy to handle, with up to a three-way entry on every floor to give you the most convenient access positions.

The Trolleylift can be supplied with single hinged steel doors, with a grey baked enamel finish at landing entrances, or concertina shutter leaf gates, with a galvanised finish.

To protect loads during travel a collapsible picket gate, electrically interlocked for safety, is available if required.

Spec
Images
Extras
Downloads

Specifications

250KG ... 1375 HIGH CAR	250H	250C	250HP	250CP
Landing Entrance	Hinged	Concertina Shutter	Hinged	Concertina Shutter
Landing Clear		leaf gate		leaf gate
Entrance(Nominal)
Width	900	765	785	760
Height	1375	1375	1240	1240
Car Entrance Protection at Front Only	None	None	Collapsible Gate	Collapsible Gate
Internal Car Width	1000	1000	**1000	**1000
Internal Car Depth	1000	1000	**950	**950
Internal Car Height	1375	1375	1350	1350
Shaft
Width	1320	1320	1320	1320
Depth	1320	1320	1320	1320
Serving Height	Floor Level	Floor Level	Floor Level	Floor Level
*Pit Depth	350	350	350	350
*Head Room	2600	2600	2600	2600

* IMPORTANT NOTE: PIT & HEADROOM
The Trolleylift normally serves at floor level and would require a pit in the lowest floor. If you are unable to provide a pit the Trolleylift can be installed to serve at 350mm above the lowest floor. The pit and headroom dimensions can be further reduced by modifying our stock models - please contact us for details.
** NOTE:
When the car is fitted with additional gates, on a through or adjacent entrance arrangement, the width/depth is reduced by a further 50mm nominal.

300KG ... 1800 HIGH CAR	300H	300C	300HP	300CP
Landing Entrance	Hinged	Concertina Shutter	Hinged	Concertina Shutter
Landing Clear		leaf gate		leaf gate
Entrance(Nominal)
Width	900	765	785	760
Height	1800	1800	1690	1690
Car Entrance Protection at Front Only	None	None	Collapsible Gate	Collapsible Gate
Internal Car Width	1000	1000	**1000	**1000
Internal Car Depth	1000	1000	**950	**950
Internal Car Height	1800	1800	1775	1775
Shaft
Width	1320	1320	1320	1320
Depth	1320	1320	1320	1320
Serving Height	Floor Level	Floor Level	Floor Level	Floor Level
*Pit Depth	570	570	570	570
*Head Room	3000	3000	3000	3000

* IMPORTANT NOTE: PIT
The Trolleylift normally serves at floor level and would require a pit in the lowest floor. If you are unable to provide a pit the Trolleylift can be installed to serve at 570mm above the lowest floor.
** NOTE:
When the car is fitted with additional gates, on a through or adjacent entrance arrangement, the width/depth is reduced by a further 50mm nominal.

Optional Extras

Free Standing Models
2 stop basic with enamelled finishes1
3 stop
4 stop
Over 4 stop
Extra per metre
Optional extras
Extra entrance c/w push panel
Stainless steel car
Stainless steel shutters (ent)
1-phase/240V operation
Uprating to 100 kg
Uprating to 150 kg (3 phase only)
Uprating to 300 kg (3 phase only)
Car safety gear- 600mm pit required
B/wt safety gear- 600mm pit required
Hinged door
Extended Selector
Car door (rise and fall)
Extra shelf (s/s only)
Controller/Bedplate Modification
Shutter leaf landing gate
Lift intercom
Infra red lamp (top compartment only)
Heated shelf & controller
Heated shelf ( extra per shelf)
Key switch
Motor room door
Reduced pit depth modification
Collapsible picket gates for car

Please contact us for more details regarding our full list of optional extras.

Contact Us

Request a Quote